015 – PL-2-6s BEC 1 x 5.35V with CFK enclosure
Code: Mauch-015
Premium-Line 2-6s BEC with 1 x 5.35V output
Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power "ON' LED. 34mm x 22mm x 7mm / 7g without CFK enclosure 36mm x 24mm x 10mm / 12g with CFK enclosure Scope of delivery:
1x PL-2-6S BEC 1x
1x CFK enclosure
1x Sensor cable Molex Clik-Mate 4p / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -> Pixhawk 1 / APM... etc. 042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1 043: JST-GH-6p -> Pixhawk 3... etc
Code: Mauch-015
Premium-Line 2-6s BEC with 1 x 5.35V output
Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power "ON' LED. 34mm x 22mm x 7mm / 7g without CFK enclosure 36mm x 24mm x 10mm / 12g with CFK enclosure Scope of delivery:
1x PL-2-6S BEC 1x
1x CFK enclosure
1x Sensor cable Molex Clik-Mate 4p / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -> Pixhawk 1 / APM... etc. 042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1 043: JST-GH-6p -> Pixhawk 3... etc
Code: Mauch-015
Premium-Line 2-6s BEC with 1 x 5.35V output
Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power "ON' LED. 34mm x 22mm x 7mm / 7g without CFK enclosure 36mm x 24mm x 10mm / 12g with CFK enclosure Scope of delivery:
1x PL-2-6S BEC 1x
1x CFK enclosure
1x Sensor cable Molex Clik-Mate 4p / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -> Pixhawk 1 / APM... etc. 042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1 043: JST-GH-6p -> Pixhawk 3... etc