061 - Power Cube - Pixhawk 2.1 Backup
Code: Mauch-061
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment.
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment. Length = 200mm This cable is included with Power-Cube 2, 3 and 4 !
Code: Mauch-061
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment.
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment. Length = 200mm This cable is included with Power-Cube 2, 3 and 4 !
Code: Mauch-061
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment.
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC's or any other equipment. Length = 200mm This cable is included with Power-Cube 2, 3 and 4 !