mauch-070-cfk-enclosure-for-hs-sensor-p2669-11192_image.jpg
mauch-070-cfk-enclosure-for-hs-sensor-p2669-11191_image.jpg
mauch-070-cfk-enclosure-for-hs-sensor-p2669-11192_image.jpg
mauch-070-cfk-enclosure-for-hs-sensor-p2669-11191_image.jpg

070 - CFK Enclosure for HS-Sensor

£8.65

Code: Mauch-070

This new enclosure will fit to any HS-xxx-xx Sensor Board.

This new enclosure will fit to any HS-xxx-xx Sensor Board.

 Due to the new design, it is now possible to install the sensor onto the frame very secure and it will be nearly impossible to brake, in case of moving cables during main battery connection/exchange.

 REM: Please connect the DF13 connectors to the sensor board before you install the sensor and the CFK cover plate.

 Included:

  • 1x  3D printed base

  • 1x  CFK cover plate

  • 2x  8mm Aluminium spacers

  • 2x  M3x5 Screws to intall the CFK plate

  • 2x  M3x5 Screws to install the enclosure to frames up to 2.5mm thickness

  • 2x  M3x10mm Screws to install the enclosure to frames with 3-6mm thickness

Quantity:
Add To Cart

Code: Mauch-070

This new enclosure will fit to any HS-xxx-xx Sensor Board.

This new enclosure will fit to any HS-xxx-xx Sensor Board.

 Due to the new design, it is now possible to install the sensor onto the frame very secure and it will be nearly impossible to brake, in case of moving cables during main battery connection/exchange.

 REM: Please connect the DF13 connectors to the sensor board before you install the sensor and the CFK cover plate.

 Included:

  • 1x  3D printed base

  • 1x  CFK cover plate

  • 2x  8mm Aluminium spacers

  • 2x  M3x5 Screws to intall the CFK plate

  • 2x  M3x5 Screws to install the enclosure to frames up to 2.5mm thickness

  • 2x  M3x10mm Screws to install the enclosure to frames with 3-6mm thickness

Code: Mauch-070

This new enclosure will fit to any HS-xxx-xx Sensor Board.

This new enclosure will fit to any HS-xxx-xx Sensor Board.

 Due to the new design, it is now possible to install the sensor onto the frame very secure and it will be nearly impossible to brake, in case of moving cables during main battery connection/exchange.

 REM: Please connect the DF13 connectors to the sensor board before you install the sensor and the CFK cover plate.

 Included:

  • 1x  3D printed base

  • 1x  CFK cover plate

  • 2x  8mm Aluminium spacers

  • 2x  M3x5 Screws to intall the CFK plate

  • 2x  M3x5 Screws to install the enclosure to frames up to 2.5mm thickness

  • 2x  M3x10mm Screws to install the enclosure to frames with 3-6mm thickness