Code: Aero-Naut-Collet-Prop-Adapter
Aero-naut Collet Type Propeller Adapter also known as clamping type or clamping cone.
These adaptors sit on the motor shaft and are clamped on by the securing collet and the pressure of the nut and washer holding the collet over the cone of the adaptor to clamp onto the shaft.
They are available in a variety of sizes.
Package Contains
1 x Collet Type Propeller Adapter (of chosen size)
This propeller adaptor has 8mm shaft with an M8 thread
7124/04
Motor Shaft = 4mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/17
Motor Shaft = 5mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/05
Motor Shaft = 6mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/54
Motor Shaft = 4mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
7124/55
Motor Shaft = 5mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
7124/56
Motor Shaft = 6mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
Code: Aero-Naut-Collet-Prop-Adapter
Aero-naut Collet Type Propeller Adapter also known as clamping type or clamping cone.
These adaptors sit on the motor shaft and are clamped on by the securing collet and the pressure of the nut and washer holding the collet over the cone of the adaptor to clamp onto the shaft.
They are available in a variety of sizes.
Package Contains
1 x Collet Type Propeller Adapter (of chosen size)
This propeller adaptor has 8mm shaft with an M8 thread
7124/04
Motor Shaft = 4mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/17
Motor Shaft = 5mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/05
Motor Shaft = 6mm
Shaft = 8mm
Whole Length = 26mm
Unthreaded length = 7.5mm
Front drilling = M2.5
7124/54
Motor Shaft = 4mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
7124/55
Motor Shaft = 5mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
7124/56
Motor Shaft = 6mm
Shaft = 8mm
Whole Length = 35mm
Unthreaded length = 15mm
Front drilling = M2.5
