CUBEPILOT - Cube Node ETH - CP-06328
CubePilot- Cube Node ETH - CP-06328
The ETH CubeNode provides ethernet networking capabilities to Cube flight controllers that do not have them natively. By enabling PPP on one of the Cube's serial ports (preferably with flow control), you can achieve a network link of up to 12 Mbps and carry multiple protocols (CAN, MAVLink) over the network without using multiple serial ports. Cube Orange+ and Cube Red running ArduPilot 4.5 or higher firmware natively support the PPP protocol. The Orange Cube and older Cubes built with networking enabled in a custom version of Ardupilot can also support the PPP protocol.
Specification:
CubeNode dimensions: 28x10x10 CubeNode
Weight only: 2.7g (7.3g with cables)
Cable weight: 8.5g
Adapter cable length: 20cm
Package contains:
1x ETH CubeNode Module
1x JST-GH to Ethernet Adapter Cable
CubePilot- Cube Node ETH - CP-06328
The ETH CubeNode provides ethernet networking capabilities to Cube flight controllers that do not have them natively. By enabling PPP on one of the Cube's serial ports (preferably with flow control), you can achieve a network link of up to 12 Mbps and carry multiple protocols (CAN, MAVLink) over the network without using multiple serial ports. Cube Orange+ and Cube Red running ArduPilot 4.5 or higher firmware natively support the PPP protocol. The Orange Cube and older Cubes built with networking enabled in a custom version of Ardupilot can also support the PPP protocol.
Specification:
CubeNode dimensions: 28x10x10 CubeNode
Weight only: 2.7g (7.3g with cables)
Cable weight: 8.5g
Adapter cable length: 20cm
Package contains:
1x ETH CubeNode Module
1x JST-GH to Ethernet Adapter Cable
CubePilot- Cube Node ETH - CP-06328
The ETH CubeNode provides ethernet networking capabilities to Cube flight controllers that do not have them natively. By enabling PPP on one of the Cube's serial ports (preferably with flow control), you can achieve a network link of up to 12 Mbps and carry multiple protocols (CAN, MAVLink) over the network without using multiple serial ports. Cube Orange+ and Cube Red running ArduPilot 4.5 or higher firmware natively support the PPP protocol. The Orange Cube and older Cubes built with networking enabled in a custom version of Ardupilot can also support the PPP protocol.
Specification:
CubeNode dimensions: 28x10x10 CubeNode
Weight only: 2.7g (7.3g with cables)
Cable weight: 8.5g
Adapter cable length: 20cm
Package contains:
1x ETH CubeNode Module
1x JST-GH to Ethernet Adapter Cable