CUBEPILOT - The Cube Orange+ Standard Set with ADS-B Carrier Board (HX4-06222)

£375.00

CubePilot- The Cube Orange+ Set  with ADS-B Carrier Board (HX4-06222)

Package contains:

  • 1 x The Cube Orange + with the ADS-B Carrier Board

  • 1 x Power Brick Mini

  • 1 x Buzzer Cable

  • 2 x CAN Cable

  • 2 x I2C Cable

  • 2 x Power Brick Mini Cable

  • 1 x GPS1 GH Cable

  • 2 x Telem Cable 

  • 1 x I2C Board

  • 4 x Screws

  • 3 x 3M Large Sticker

  • 2 x 3M Medium Sticker

  • 4 x 3M Small Sticker

Features

1. Faster H7 SOC with 1MB ram.

2. Upgraded triple redundant IMU sensors for extra redundancy.

3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.

4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.

5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).

6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems. 

7. Manufacturers can design their own carrier boards to suit their specific needs now and in the futu

CubePilot- The Cube Orange+ Set  with ADS-B Carrier Board (HX4-06222)

Package contains:

  • 1 x The Cube Orange + with the ADS-B Carrier Board

  • 1 x Power Brick Mini

  • 1 x Buzzer Cable

  • 2 x CAN Cable

  • 2 x I2C Cable

  • 2 x Power Brick Mini Cable

  • 1 x GPS1 GH Cable

  • 2 x Telem Cable 

  • 1 x I2C Board

  • 4 x Screws

  • 3 x 3M Large Sticker

  • 2 x 3M Medium Sticker

  • 4 x 3M Small Sticker

Features

1. Faster H7 SOC with 1MB ram.

2. Upgraded triple redundant IMU sensors for extra redundancy.

3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.

4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.

5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).

6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems. 

7. Manufacturers can design their own carrier boards to suit their specific needs now and in the futu