








GT Power G.T. Power - 180A Watt Meter 4.8-60V
Code: CHG-01-04-GTPower-180A
This is a 180A high precision watt meter and power analyzer with LCD backlight. The Analyzer can easily calculate the aircraft's voltage, current, power, discharge capacity and discharge time.
Current range: 0-180A
Voltage range: 0-60v.
Capacity range: 0-65Ah
Power drain range: 0-6554 Wh
Package contains:
1 x G.T. Power - 180A Watt Meter 4.8-60V
Features:
To prevent peak currents damaging battery, motor control, motors, wiring and connectors. Verify sufficient operating voltage under load.
Set cutoff voltages, check battery capacity & health.
Balance battery cells, Confirm proper battery charger operation.
Detect receivers and actual operating current so as to make sure whether an UBEC is needed.
Code: CHG-01-04-GTPower-180A
This is a 180A high precision watt meter and power analyzer with LCD backlight. The Analyzer can easily calculate the aircraft's voltage, current, power, discharge capacity and discharge time.
Current range: 0-180A
Voltage range: 0-60v.
Capacity range: 0-65Ah
Power drain range: 0-6554 Wh
Package contains:
1 x G.T. Power - 180A Watt Meter 4.8-60V
Features:
To prevent peak currents damaging battery, motor control, motors, wiring and connectors. Verify sufficient operating voltage under load.
Set cutoff voltages, check battery capacity & health.
Balance battery cells, Confirm proper battery charger operation.
Detect receivers and actual operating current so as to make sure whether an UBEC is needed.
Code: CHG-01-04-GTPower-180A
This is a 180A high precision watt meter and power analyzer with LCD backlight. The Analyzer can easily calculate the aircraft's voltage, current, power, discharge capacity and discharge time.
Current range: 0-180A
Voltage range: 0-60v.
Capacity range: 0-65Ah
Power drain range: 0-6554 Wh
Package contains:
1 x G.T. Power - 180A Watt Meter 4.8-60V
Features:
To prevent peak currents damaging battery, motor control, motors, wiring and connectors. Verify sufficient operating voltage under load.
Set cutoff voltages, check battery capacity & health.
Balance battery cells, Confirm proper battery charger operation.
Detect receivers and actual operating current so as to make sure whether an UBEC is needed.