Holybro - Kotleta20 CAN ESC (1pc)
Code: HB-02-01-Kotleta-20-31021
Kotleta 20 is an advanced sensorless BLDC propeller drive controller with CAN bus interface. It runs the Sapog* Firmware. Kotleta 20 has one CAN bus with two sockets onboard.
Features
• Excellent dynamic characteristics. • Regenerative braking and active freewheeling. • 500 W continuous power output at 8.8 g weight. • Optional RPM control loop (RPM governor). • Self diagnostics and health status reporting. • Highly configurable. • Low noise and low current ripple due to the low-ESR embedded filtering capacitors and highfrequency PWM. • Supported interfaces: • CAN (ISO 11898-2) • UART. • RCPWM (analog PWM interface widely used in robotics). • High quality assurance: • Protection against unlicensed (counterfeit) production by means of a digital signature installed on every manufactured unit. • Open source firmware – Sapog (3-clause BSD license).
Package included:
Kotleta 20 ESC x 1
100 mm long 16 AWG wires(Red) x 1
100 mm long 16 AWG wires(Black) x 1
Electrolytic capacito: 220uF 35v x 1
4 to 4 pin cable (CAN) x 1
6 to 6 pin cable(Debug) x 1
Code: HB-02-01-Kotleta-20-31021
Kotleta 20 is an advanced sensorless BLDC propeller drive controller with CAN bus interface. It runs the Sapog* Firmware. Kotleta 20 has one CAN bus with two sockets onboard.
Features
• Excellent dynamic characteristics. • Regenerative braking and active freewheeling. • 500 W continuous power output at 8.8 g weight. • Optional RPM control loop (RPM governor). • Self diagnostics and health status reporting. • Highly configurable. • Low noise and low current ripple due to the low-ESR embedded filtering capacitors and highfrequency PWM. • Supported interfaces: • CAN (ISO 11898-2) • UART. • RCPWM (analog PWM interface widely used in robotics). • High quality assurance: • Protection against unlicensed (counterfeit) production by means of a digital signature installed on every manufactured unit. • Open source firmware – Sapog (3-clause BSD license).
Package included:
Kotleta 20 ESC x 1
100 mm long 16 AWG wires(Red) x 1
100 mm long 16 AWG wires(Black) x 1
Electrolytic capacito: 220uF 35v x 1
4 to 4 pin cable (CAN) x 1
6 to 6 pin cable(Debug) x 1
Code: HB-02-01-Kotleta-20-31021
Kotleta 20 is an advanced sensorless BLDC propeller drive controller with CAN bus interface. It runs the Sapog* Firmware. Kotleta 20 has one CAN bus with two sockets onboard.
Features
• Excellent dynamic characteristics. • Regenerative braking and active freewheeling. • 500 W continuous power output at 8.8 g weight. • Optional RPM control loop (RPM governor). • Self diagnostics and health status reporting. • Highly configurable. • Low noise and low current ripple due to the low-ESR embedded filtering capacitors and highfrequency PWM. • Supported interfaces: • CAN (ISO 11898-2) • UART. • RCPWM (analog PWM interface widely used in robotics). • High quality assurance: • Protection against unlicensed (counterfeit) production by means of a digital signature installed on every manufactured unit. • Open source firmware – Sapog (3-clause BSD license).
Package included:
Kotleta 20 ESC x 1
100 mm long 16 AWG wires(Red) x 1
100 mm long 16 AWG wires(Black) x 1
Electrolytic capacito: 220uF 35v x 1
4 to 4 pin cable (CAN) x 1
6 to 6 pin cable(Debug) x 1