




















RadioMaster RM-ER6-Receiver
Code: RM-02-06-ER6-Receiver
The RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.
The ER6 ELRS receiver has been specially designed for fixed-wing users. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. A 4-wire CRSF interface is provided to facilitate later expansion of telemetry sensors. The ER6 features a dual-antenna with telemetry power up to 100mw. The receiver shell adopts one-piece molding process with high structural strength.
Features:
· Based on the Revolutionary ExpressLRS System
· High performance, high reliability, flexible configuration, fast response speed and ultra-long range
· Support 6 PWM Channels
· Optimized ground up PCB design
· Automatically voltage telemetry of external battery voltage or built-in receiver voltage
· Supports Wi-Fi updates and WEBUI configuration
· High quality 2.54 mm connector
· Standard 20 cm High Sensitivity Antenna
· Reserve 4pin CRSF input port
· The shell adopts one-piece molding process with high structural strength
· For fixed-wing aircraft and more
· Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Specification:
· Item: ER6 2.4GHz ELRS PWM Receiver
· Power supply: DC 4.5 - 8.4V
· Antenna type: 20cm high sensitivity dual antenna
· Wireless protocol: ExpressLRS 3.3.0 pre-installed
· Output channel: 6CH PWM
· Serial Output: CRSF / Sbus
· Telemetry power: maximum 100mw (LUA Adjustable)
· Telemetry Battery voltage detection range: DC 4.0 - 35V
· Bus interface: CRSF
· Weight: 14.5 grams
· Dimensions: 43*25*15mm
· Firmware: Device Category: Radiomaster 2.4Ghz / Device: ER6 2.4GHz Diversity+6xPWM RX
Package Contains:
· 1x ER6 2.4GHz ELRS PWM Receiver
· 1x Voltage telemetry wire (Type-B)
· 1x CRSF wire
· 1x ELRS- RX- SBUS wire
Code: RM-02-06-ER6-Receiver
The RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.
The ER6 ELRS receiver has been specially designed for fixed-wing users. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. A 4-wire CRSF interface is provided to facilitate later expansion of telemetry sensors. The ER6 features a dual-antenna with telemetry power up to 100mw. The receiver shell adopts one-piece molding process with high structural strength.
Features:
· Based on the Revolutionary ExpressLRS System
· High performance, high reliability, flexible configuration, fast response speed and ultra-long range
· Support 6 PWM Channels
· Optimized ground up PCB design
· Automatically voltage telemetry of external battery voltage or built-in receiver voltage
· Supports Wi-Fi updates and WEBUI configuration
· High quality 2.54 mm connector
· Standard 20 cm High Sensitivity Antenna
· Reserve 4pin CRSF input port
· The shell adopts one-piece molding process with high structural strength
· For fixed-wing aircraft and more
· Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Specification:
· Item: ER6 2.4GHz ELRS PWM Receiver
· Power supply: DC 4.5 - 8.4V
· Antenna type: 20cm high sensitivity dual antenna
· Wireless protocol: ExpressLRS 3.3.0 pre-installed
· Output channel: 6CH PWM
· Serial Output: CRSF / Sbus
· Telemetry power: maximum 100mw (LUA Adjustable)
· Telemetry Battery voltage detection range: DC 4.0 - 35V
· Bus interface: CRSF
· Weight: 14.5 grams
· Dimensions: 43*25*15mm
· Firmware: Device Category: Radiomaster 2.4Ghz / Device: ER6 2.4GHz Diversity+6xPWM RX
Package Contains:
· 1x ER6 2.4GHz ELRS PWM Receiver
· 1x Voltage telemetry wire (Type-B)
· 1x CRSF wire
· 1x ELRS- RX- SBUS wire
Code: RM-02-06-ER6-Receiver
The RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.
The ER6 ELRS receiver has been specially designed for fixed-wing users. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. A 4-wire CRSF interface is provided to facilitate later expansion of telemetry sensors. The ER6 features a dual-antenna with telemetry power up to 100mw. The receiver shell adopts one-piece molding process with high structural strength.
Features:
· Based on the Revolutionary ExpressLRS System
· High performance, high reliability, flexible configuration, fast response speed and ultra-long range
· Support 6 PWM Channels
· Optimized ground up PCB design
· Automatically voltage telemetry of external battery voltage or built-in receiver voltage
· Supports Wi-Fi updates and WEBUI configuration
· High quality 2.54 mm connector
· Standard 20 cm High Sensitivity Antenna
· Reserve 4pin CRSF input port
· The shell adopts one-piece molding process with high structural strength
· For fixed-wing aircraft and more
· Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Specification:
· Item: ER6 2.4GHz ELRS PWM Receiver
· Power supply: DC 4.5 - 8.4V
· Antenna type: 20cm high sensitivity dual antenna
· Wireless protocol: ExpressLRS 3.3.0 pre-installed
· Output channel: 6CH PWM
· Serial Output: CRSF / Sbus
· Telemetry power: maximum 100mw (LUA Adjustable)
· Telemetry Battery voltage detection range: DC 4.0 - 35V
· Bus interface: CRSF
· Weight: 14.5 grams
· Dimensions: 43*25*15mm
· Firmware: Device Category: Radiomaster 2.4Ghz / Device: ER6 2.4GHz Diversity+6xPWM RX
Package Contains:
· 1x ER6 2.4GHz ELRS PWM Receiver
· 1x Voltage telemetry wire (Type-B)
· 1x CRSF wire
· 1x ELRS- RX- SBUS wire