RadioMaster - TX16s MKII MAX- 4in1 (LBT) with AG01 Gimbal

Code: RM-TX16s-MKII-MAX-4IN1-AG01

TX16s Mark II MAX- Radio Controller (M2)

• 4in1 (LBT)

• with AG01 Hall Gimbal

**NOTE: This product does not contain features of the ELRS radio**

Comparison table for TX16S Mark II vs TX16SMark II MAX is here 

Features

• Improved internal circuitry and optimized power supply.

• New charge circuitry with integrated reverse-polarity protection.

• Optimized charge IC now allows up to 2.2A internal USB-C charge current.

• Rear-mounted audio jack provided headphone output.

• V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).

• Optional high/low rear grips are included for improved ergonomics.

• Improved S1/S2 knobs with clear center detents.

• Improved LS/RS Sliders with smoother feel and better center detents.

• Redesigned battery cover for improved battery access.

• Retooled body shell with improved fit and finish.

• Trainer socket changed to standard TRS 3.5mm socket.

• Rear DIY Socket added for personalized mods.

• Improved internal plastics for better longevity.

 Specification

• Items: TX16S Mark II Max

• Size: 287x129x184mm

• Weight: 750g (without battery)

• Transmission frequency: 2.400GHz-2.480GHz

• Transmitter module: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)

• Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent)

• SD card: 256MB by default, 8GB maximum

• Antenna gain: 2db (transmit power adjustable)

• Working current: 400mA

• Working voltage: 6.6-8.4v DC

• Remote control distance:> 2km @ 22dbm

• Radio firmware: EdgeTX

• Module Firmware: Multiprotocol- Module (4IN1)

• Channels: Up to 16 channels (depending on the receiver)

• Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272

• Gimbal: AG01 CNC Hall sensor

• Module Bay: JR compatible module bay

• Upgrade method: Supports USB-C online / SD card offline upgrade

Package Includes

• 1 x TX16S Mark II Max Radio Controller

• 1 x 18650 Tray

• 1 x USB-C Cable

• 1 x Screen Protector

• 1 pair of flat grips

• 1 pair of raised grips  (installed on radio by default)

• 1 x TX16S Key Chain

Support EdgeTX and OpenTX

EdgeTX is installed by default (Touch screen enabled). 

* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later. 

Available in 4in1

One reason to get the 4in1 is if you only want to use other protocols such as Frsky D8/D16, but these are kind of obsolete and slowly phasing out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1 as you don’t want to have another ELRS module onboard doing nothing. An external ELRS module might have the advantage of higher maximum output power of up to 1W. But honestly the internal module’s 250mW is plenty for FPV pilots, giving you miles of range in ideal conditions. "

EU LBT Version

4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX

AG01 GIMBALS

AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. 

Flat & Raised Grips Included

Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box. 

External Module Bay

The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping. 

Upgraded Design

• Retooled faceplate with improved fit and finish

• Improved S1/S2 knobs with center detents

• 4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.

• Improved LS/RS Sliders with smoother feel and better center detents.

• New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds a headphone audio feature.

• Redesigned battery cover, easier to remove.

•  Rear DIY Socket added for personalized mods.