Seagull UAV Seagull #IR
Code: CAM-02-05-Seagull-#IR1
#IR – Speed of Light.
No viable tethered solutions to trigger your camera? Does your camera feature infrared receiver?
Don’t worry Seagull #IR got you covered, it gives control of your cameras shutter via infrared commands. #IR will work with Sony, Nikon, Canon and Olympus cameras that are able to be triggered by an infrared remote.
What it does Seagull
#IR supports the following modes
Picture ( Shutter release action )
Video Record ( NOTE: Only works with capable Sony cameras )
What it supports
The following hardware is supported Flight Controllers:
Pixhawk 1
Pixhawk 2.1
Pixracer
APM 2.6
APM 2.5
DJI Wookong D
JI A2
DJI A3
R/C radio systems: That interfaces with standard PWM signal (almost any radio system)
and many others with camera support
What you get
The following is part of this product
1 x Seagull #IR
1 x Servo cable ( 30cm length )
Specifications
Details for this product
Voltage: 3.5 – 5.5 volts ( 5 volts recommended, do NOT exceed 5.5V! )
Current draw: 22.5mA MAX
Input signal: Standard R/C PWM servo signal ( between 1000 – 2000uS )
Dimensions: 23.5mm x 9.8mm x 4.4mm
Weight: 1g ( ~4g with servo cable )
Code: CAM-02-05-Seagull-#IR1
#IR – Speed of Light.
No viable tethered solutions to trigger your camera? Does your camera feature infrared receiver?
Don’t worry Seagull #IR got you covered, it gives control of your cameras shutter via infrared commands. #IR will work with Sony, Nikon, Canon and Olympus cameras that are able to be triggered by an infrared remote.
What it does Seagull
#IR supports the following modes
Picture ( Shutter release action )
Video Record ( NOTE: Only works with capable Sony cameras )
What it supports
The following hardware is supported Flight Controllers:
Pixhawk 1
Pixhawk 2.1
Pixracer
APM 2.6
APM 2.5
DJI Wookong D
JI A2
DJI A3
R/C radio systems: That interfaces with standard PWM signal (almost any radio system)
and many others with camera support
What you get
The following is part of this product
1 x Seagull #IR
1 x Servo cable ( 30cm length )
Specifications
Details for this product
Voltage: 3.5 – 5.5 volts ( 5 volts recommended, do NOT exceed 5.5V! )
Current draw: 22.5mA MAX
Input signal: Standard R/C PWM servo signal ( between 1000 – 2000uS )
Dimensions: 23.5mm x 9.8mm x 4.4mm
Weight: 1g ( ~4g with servo cable )
Code: CAM-02-05-Seagull-#IR1
#IR – Speed of Light.
No viable tethered solutions to trigger your camera? Does your camera feature infrared receiver?
Don’t worry Seagull #IR got you covered, it gives control of your cameras shutter via infrared commands. #IR will work with Sony, Nikon, Canon and Olympus cameras that are able to be triggered by an infrared remote.
What it does Seagull
#IR supports the following modes
Picture ( Shutter release action )
Video Record ( NOTE: Only works with capable Sony cameras )
What it supports
The following hardware is supported Flight Controllers:
Pixhawk 1
Pixhawk 2.1
Pixracer
APM 2.6
APM 2.5
DJI Wookong D
JI A2
DJI A3
R/C radio systems: That interfaces with standard PWM signal (almost any radio system)
and many others with camera support
What you get
The following is part of this product
1 x Seagull #IR
1 x Servo cable ( 30cm length )
Specifications
Details for this product
Voltage: 3.5 – 5.5 volts ( 5 volts recommended, do NOT exceed 5.5V! )
Current draw: 22.5mA MAX
Input signal: Standard R/C PWM servo signal ( between 1000 – 2000uS )
Dimensions: 23.5mm x 9.8mm x 4.4mm
Weight: 1g ( ~4g with servo cable )