Code: TM-A-04-07-FPV-F55A-II-Pro-6S-4in1-32-Bit
The F55 Pro II esc updates the original 55A esc with a new heatsink design, LED, and increased the BEC current to 10V@2A.
Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.
Suitable for advanced FPV drone players and cinematic shooters, it uses a high-performance 32-bit ARM microprocessor with a running frequency of up to 64MHz.
The ESC firmware supports various functions to prevent motor desynchronization problems.
1 x F55A Pro II 4 in 1 Brushless ESC
5 x Damping Rubbers
1 x 12AWG-130MM with XT60 Soldered input wires
2 x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1 x Capacitor
Code: TM-A-04-07-FPV-F55A-II-Pro-6S-4in1-32-Bit
The F55 Pro II esc updates the original 55A esc with a new heatsink design, LED, and increased the BEC current to 10V@2A.
Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.
Suitable for advanced FPV drone players and cinematic shooters, it uses a high-performance 32-bit ARM microprocessor with a running frequency of up to 64MHz.
The ESC firmware supports various functions to prevent motor desynchronization problems.
1 x F55A Pro II 4 in 1 Brushless ESC
5 x Damping Rubbers
1 x 12AWG-130MM with XT60 Soldered input wires
2 x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1 x Capacitor
