Team Black Sheep TBS - Caipirinha 2 -PNP
Code: TBS-TOP-CAP2-PNP
TBS - Caipirinha 2 -PNP
The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.
The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1050kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!
Features
Small, lightweight, fly anywhere design
Ultimate in flight stability and endurance
Virtually indestructible EPP/Plywood construction
Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
2x push-to-open equipment bays for R/C and FPV electronics
Pre-cut, sanded and covered ultra-lightweight elevons & pushrods
Kit contains:
CAPIRINHA 2 with all hardware accessories
2x Digital MG Servo 6kgf/cm, 5-6V
CP2814-1050kV Cobra Motor
50A HobbyWing Skywalker Wing ESC
Aeronaut 10x6 folding prop with prop assembly (CNC aluminum)
Everything prepared as far as possible. Final assembly time around 2 hours.
Specifications
36.5in / 93cm wingspan!
50oz / 1400g AUW (including GoPro Session5 and battery)
90min flying time
45mi / 75km endurance
Battery (4S):
Capacity: 4500mAh 4S - 6600mAh 4S, 20C or more
SUGGESTED Dimension: 48 x 36 x 150 mm, 525g
MAX Dimension: 60 x 44 x 165 mm, 550g
Recommended FPV and Radio equipment
FPV camera: TBS ZeroZero II or TBS69
Video transmission:Crossfire Micro Rx or Diversity Rx
5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO
2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx
Downloads
Code: TBS-TOP-CAP2-PNP
TBS - Caipirinha 2 -PNP
The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.
The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1050kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!
Features
Small, lightweight, fly anywhere design
Ultimate in flight stability and endurance
Virtually indestructible EPP/Plywood construction
Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
2x push-to-open equipment bays for R/C and FPV electronics
Pre-cut, sanded and covered ultra-lightweight elevons & pushrods
Kit contains:
CAPIRINHA 2 with all hardware accessories
2x Digital MG Servo 6kgf/cm, 5-6V
CP2814-1050kV Cobra Motor
50A HobbyWing Skywalker Wing ESC
Aeronaut 10x6 folding prop with prop assembly (CNC aluminum)
Everything prepared as far as possible. Final assembly time around 2 hours.
Specifications
36.5in / 93cm wingspan!
50oz / 1400g AUW (including GoPro Session5 and battery)
90min flying time
45mi / 75km endurance
Battery (4S):
Capacity: 4500mAh 4S - 6600mAh 4S, 20C or more
SUGGESTED Dimension: 48 x 36 x 150 mm, 525g
MAX Dimension: 60 x 44 x 165 mm, 550g
Recommended FPV and Radio equipment
FPV camera: TBS ZeroZero II or TBS69
Video transmission:Crossfire Micro Rx or Diversity Rx
5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO
2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx
Downloads
Code: TBS-TOP-CAP2-PNP
TBS - Caipirinha 2 -PNP
The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.
The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1050kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!
Features
Small, lightweight, fly anywhere design
Ultimate in flight stability and endurance
Virtually indestructible EPP/Plywood construction
Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
2x push-to-open equipment bays for R/C and FPV electronics
Pre-cut, sanded and covered ultra-lightweight elevons & pushrods
Kit contains:
CAPIRINHA 2 with all hardware accessories
2x Digital MG Servo 6kgf/cm, 5-6V
CP2814-1050kV Cobra Motor
50A HobbyWing Skywalker Wing ESC
Aeronaut 10x6 folding prop with prop assembly (CNC aluminum)
Everything prepared as far as possible. Final assembly time around 2 hours.
Specifications
36.5in / 93cm wingspan!
50oz / 1400g AUW (including GoPro Session5 and battery)
90min flying time
45mi / 75km endurance
Battery (4S):
Capacity: 4500mAh 4S - 6600mAh 4S, 20C or more
SUGGESTED Dimension: 48 x 36 x 150 mm, 525g
MAX Dimension: 60 x 44 x 165 mm, 550g
Recommended FPV and Radio equipment
FPV camera: TBS ZeroZero II or TBS69
Video transmission:Crossfire Micro Rx or Diversity Rx
5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO
2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx